TÜV-EPS
 
 
  Accredited testing and certification of electronical products | Electrical Safety, EMC and Telecommunication     
 
 



Time to Marktet is now a days very important

Dear customer,
In order to finish your project as soon as possible, we would like to ask you to give us extra information about your product. This applicationform will be automaticlly generated and sent to our test engineer. Please select the appropiate services and fill in the requested data. After completing the form, you will receive an email for confirmation.


Please select the requested tests for this application form

EMC TELECOM SAFETY FCC/IC


Please fill in all fields as accurate as possible
Applicants details
Company name
Company address:
Postal code/City
Country
Website address
Contact person
Phone number
Email address
Email address
Product information (General)
Description of EUT
Brand mark
Model(s)
Please give a short description of operating summary and intended use:
Remarks
Weigth (kg)
Size/dimensions (mm)
Which software or firmware version has product?
Test standard (if known)

EMC

Description and number of AC mains cables attached
Description and Number of DC mains cables attached
Can any of these cables be > 3 meter? Yes
No
Description and Number of LAN/RS232 or other comm.
Can any of these cables be > 3 meter? Yes
No
Loads such as e.g. batteries, air, gases, etc.
Applicant will deliver such loads Contact about this with specialist before quotation
No contact required
Please state what EMC standards are requested (moet checklijstje worden, kunnen meerdere zijn) EN 55022
EN 55024
EN 61000-6 xseries
301-489_series
Other EMC standard or own Standards or EMC methods Contact about this with specialist before quotation
No contact required

TELECOM




What kind of devices do you want to test:

Transmitter Receiver

Transmitter details

Type of Equipment Transmitter Transceiver
Operating Frequency
Duty Cycle <0.1% <1% <10% up to 100%
Type of station Fixed Portable Mobile
Type of modulation
Channel spacing
 
Frequency alignment range (AR) From MHz to MHz
Channel Switching Range (SR) From MHz to MHz
Operating Frequency Range (OR) From MHz to MHz
Effective radiated power Watt dBm dBuA/m
Is the output variable?
Minimum Watt dBm
Maximum Watt dBm
 
Type of Antenna
Fieldstrength at 10 meter distance dBuA/m Watt dBm
 
Transmitter class of emission ITU code
 
Transmitter powered by
Nominal voltage VDC VAC
Remarks
Automatic switch off Does not apply Cut off voltage
 
Transmitter product classification (only applicable for EN300/330 tests)
Class 1 Inductive loop coil Tx, type tested with an antenna as either-an integral antenna (antenna type 1); or-a dedicated antenna supplied with the equipment (antenna type 2).
Class 2 Inductive loop coil Tx, allowing field customization of the loop antenna.Customization is only allowed according to manufacturer’s design rulespublished in the equipment manual.
Class 3 This class of equipment is intended for use with customized large size loopantennas only. The loop coil Tx is type tested without an antenna by usingan artificial antenna.
Class 4 E-field Tx, type tested with each type of antenna to be used.
Loop Area m2

Receiver details

Type of Equipment Receiver
Operating Frequency
Type of station Fixed Portable Mobile
Type of modulation
Channel spacing
 
Frequency alignment range (AR) From MHz to MHz
Channel Switching Range (SR) From MHz to MHz
Operating Frequency Range (OR) From MHz to MHz
 
 
receiver powered by
Nominal voltage VDC VAC
Remarks
 
receiver product classification
Class 1 Highly reliable SRD communication media; e.g. servinghuman life inherent systems (may result in a physical risk to aperson)
Class 2 Medium reliable SRD communication media e.g.causing Inconvenience to persons, which cannot simplybe overcome by other means
Class 3 Standard reliable SRD communication media e.g.Inconvenience to persons, which can simply beovercome by other means (e.g. manual)

General test information

Extreme test voltages over which equipment is to be tested
Tranmitter
: From to
Receiver
: From to
 
Extreme temperature ranges over which the equipment is to be tested
-20°C to +55°C (Category I -General-)
-10°C to +55°C (Category II -Portable equipment-)
0°C to +55°C (Category III -Equipment for normal indoor use-)
Other (Manufacturer’s specified temperature range): from: 0C to: 0C
 
Can the receiver be set in continous receive mode? Yes No
Can the receiver be set in standby mode? Yes No

SAFETY

Is the Powerunit certified? Yes
No
Is the Poweradapter certified? Yes
No

FCC / IC

You have requested this test
News

LED Event 2011

TÜV Rheinland EPS B.V. attended the LED event 2011 in the Brabanthallen Den Bosch


The theme "From Electronics to LED applications" indicates that the electronics is the basis of LED applications. The possibilities of electronics develop rapidly and provide increasing opportunities in making LED applications. This makes this event an opportunity to get properly and fully informed of your activities. TÜV Rheinland EPS B.V.(Electronic Products and Services) is also available for advice in terms of checks required for using LEDs. We are pleased to advise you on the LED event 2011, you can find us on the LED event in stand 3.

Read more »»
Contact

TÜV Rheinland EPS B.V.
Smidshornerweg 18
9822 TL Niekerk
The Netherlands

Phone +31 (0)594 505005
Fax +31 (0)594 504804

Registered at the Chamber of Commerce Groningen with no. 27247331



 
 
  Visit TUVdotCOM
 
    © 2012 TUV-Rheinland realisation: STEL-IT