TÜV rheinland logo
 
 
  Accredited testing and certification of electronical products | Electrical Safety, EMC and Telecommunication     
 
 


Applicatieformulier
Om u project zo snel mogelijk af te ronden is goede informatie van cruciaal belang. Met onderstaand formulier kunt u aangeven welke testen / keuringen u bij ons laat plaatsvinden. Meervoudige selecties zijn mogelijk. Vervolgens kunt u de bijbehorende informatie invoeren. Wij verzoeken u om zoveel mogelijk velden van informatie te voorzien. Dit helpt u en ons voor een snelle afhandeling van uw project.

 


Please select the requested tests for this application form

EMC TELECOM SAFETY FCC/IC


Please fill in all fields as accurate as possible

Applicants details
Company name
Company address:
Postal code/City
Country
Website address
Contact person
Phone number
Email address
Email address
Product information (General)
Description of EUT
Brand mark
Model(s)
Please give a short description of operating summary and intended use:
Remarks
Weigth (kg)
Size/dimensions (mm)
Which software or firmware version has product?
Test standard (if known)

EMC

Description and number of AC mains cables attached
Description and Number of DC mains cables attached
Can any of these cables be > 3 meter? Yes
No
Description and Number of LAN/RS232 or other comm.
Can any of these cables be > 3 meter? Yes
No
Loads such as e.g. batteries, air, gases, etc.
Applicant will deliver such loads Contact about this with specialist before quotation
No contact required
Please state what EMC standards are requested (moet checklijstje worden, kunnen meerdere zijn) EN 55022
EN 55024
EN 61000-6 xseries
301-489_series
Other EMC standard or own Standards or EMC methods Contact about this with specialist before quotation
No contact required

TELECOM




What kind of devices do you want to test:

Transmitter Receiver

Transmitter details

Type of Equipment Transmitter Transceiver
Operating Frequency
Duty Cycle <0.1% <1% <10% up to 100%
Type of station Fixed Portable Mobile
Type of modulation
Channel spacing
 
Frequency alignment range (AR) From MHz to MHz
Channel Switching Range (SR) From MHz to MHz
Operating Frequency Range (OR) From MHz to MHz
Effective radiated power Watt dBm dBuA/m
Is the output variable?
Minimum Watt dBm
Maximum Watt dBm
 
Type of Antenna
Fieldstrength at 10 meter distance dBuA/m Watt dBm
 
Transmitter class of emission ITU code
 
Transmitter powered by
Nominal voltage VDC VAC
Remarks
Automatic switch off Does not apply Cut off voltage
 
Transmitter product classification (only applicable for EN300/330 tests)
Class 1 Inductive loop coil Tx, type tested with an antenna as either-an integral antenna (antenna type 1); or-a dedicated antenna supplied with the equipment (antenna type 2).
Class 2 Inductive loop coil Tx, allowing field customization of the loop antenna.Customization is only allowed according to manufacturer’s design rulespublished in the equipment manual.
Class 3 This class of equipment is intended for use with customized large size loopantennas only. The loop coil Tx is type tested without an antenna by usingan artificial antenna.
Class 4 E-field Tx, type tested with each type of antenna to be used.
Loop Area m2

Receiver details

Type of Equipment Receiver
Operating Frequency
Type of station Fixed Portable Mobile
Type of modulation
Channel spacing
 
Frequency alignment range (AR) From MHz to MHz
Channel Switching Range (SR) From MHz to MHz
Operating Frequency Range (OR) From MHz to MHz
 
 
receiver powered by
Nominal voltage VDC VAC
Remarks
 
receiver product classification
Class 1 Highly reliable SRD communication media; e.g. servinghuman life inherent systems (may result in a physical risk to aperson)
Class 2 Medium reliable SRD communication media e.g.causing Inconvenience to persons, which cannot simplybe overcome by other means
Class 3 Standard reliable SRD communication media e.g.Inconvenience to persons, which can simply beovercome by other means (e.g. manual)

General test information

Extreme test voltages over which equipment is to be tested
Tranmitter
: From to
Receiver
: From to
 
Extreme temperature ranges over which the equipment is to be tested
-20°C to +55°C (Category I -General-)
-10°C to +55°C (Category II -Portable equipment-)
0°C to +55°C (Category III -Equipment for normal indoor use-)
Other (Manufacturer’s specified temperature range): from: 0C to: 0C
 
Can the receiver be set in continous receive mode? Yes No
Can the receiver be set in standby mode? Yes No

SAFETY

Is the Powerunit certified? Yes
No
Is the Poweradapter certified? Yes
No

FCC / IC

You have requested this test
Nieuws

No news at this moment / Geen nieuws momenteel
Contact

TÜV Rheinland Nederland
Eiberkamp 10
9351 VT Leek
Nederland

Tel +31 (0)594 505005
Fax +31 (0)594 504804

Geregistreerd bij Kamer van Koophandel te Groningen onder nummer 27288788



 
 
  Visit TUVdotCOM
 
    © 2018 TUV-Rheinland realisation: STEL-IT